For merchandisers and QA at mills and exporters

Fabric test report: format, buyer requirements and a register that tracks validity

A fabric test report is the document a laboratory or in-house lab issues after testing a fabric sample, listing each test (colour fastness, rubbing, pilling, pH, strength, dimensional stability), the method used, the result and whether it meets the buyer's requirement. This page explains the fabric test report format field by field, the common tests and their method references, how to read grey-scale grades, how to judge a report against your buyer and how long a report stays valid.

In short: A fabric test report lists each test, its method (for example ISO 105-C06 for washing fastness), the result and the buyer's requirement, with a pass or fail per line; one failing line fails the report. Colour fastness is graded 5 (no change) to 1 on the grey scale, in half steps. Validity is set by the buyer. Fabric Inspection Software keeps every report by lot and PO and alerts before expiry.

What is a fabric test report?

Before an export buyer accepts bulk fabric or garments, they usually want proof that the fabric meets their physical and chemical requirements. That proof is the fabric test report: a laboratory's (or an in-house lab's) record of which tests were run on a sample of the fabric, by which method, with what result. Mills use it to release fabric to their customers; garment exporters use it to show the buyer's QA that the fabric in the shipment was tested; buying houses collect it from every supplier. A report that is missing, out of date or failing on one line can hold a shipment, which is why merchandisers spend so much time chasing and checking them.

Fabric test report format, field by field

Layouts differ between laboratories, but a complete fabric test report always carries the same blocks:

  • Header: laboratory name, report number, date received, date reported, number of pages.
  • Applicant and buyer: who sent the sample and for which buyer or programme.
  • Sample description: fabric, composition, GSM, colour, style, PO, lot or dye lot, sample reference.
  • Test, method and parameter: each test with its method reference (ISO, AATCC or ASTM) and the parameter measured, for example "rubbing · wet".
  • Result: a grade, a number with its unit, or pass / fail.
  • Requirement: the buyer's minimum, maximum or range for that line, when the lab was given it.
  • Verdict: pass or fail per line and overall. One failing requirement line fails the report.
  • Remarks and signatory: deviations, the authorised signatory and, where applicable, the lab's own accreditation statement.
Test LT-0042 · Lot L-KN-2207FAIL

Buyer Nordic Basics AB · Single jersey 180 GSM · Lab report TL/26/11873 · Valid until 26 Oct 2027

TestResultRequirement
Washing ISO 105-C06 · change4≥ 4✓
Washing · staining (cotton)3-4≥ 3-4✓
Rubbing ISO 105-X12 · dry4≥ 4✓
Rubbing · wet2-3≥ 3✗
pH ISO 30716.24.0 to 7.5✓
Pilling ISO 12945-23-4≥ 3✓

LT-0043 (same quality, last season) · passed · Expires in 20 days

Sample data · illustrative register entry · buyer, lab and requirements are fictitious examples, not standards

Which tests are in a fabric test report?

The buyer's test programme decides. These are the tests that appear most often for apparel fabric, with typical method references. Method names are references only: the buyer's manual gives the exact method, conditions and requirement.

TestMethod reference (ISO · AATCC / ASTM)PropertyResult typeParameters
Colour fastness to washingISO 105-C06 · AATCC 61Colour fastnessGrey-scale grade 1–5Change in colour, Staining (cotton), Staining (wool), Staining (polyamide)
Colour fastness to rubbingISO 105-X12 · AATCC 8Colour fastnessGrey-scale grade 1–5Dry, Wet
Colour fastness to lightISO 105-B02 · AATCC 16.3Colour fastnessGrey-scale grade 1–5Change in colour
Colour fastness to perspirationISO 105-E04Colour fastnessGrey-scale grade 1–5Acid · change, Acid · staining, Alkaline · change, Alkaline · staining
Colour fastness to waterISO 105-E01Colour fastnessGrey-scale grade 1–5Change in colour, Staining
PillingISO 12945-2 (Martindale) · ASTM D4970 / D3512PillingGrey-scale grade 1–5Grade
pH of aqueous extractISO 3071ChemicalNumber (pH)pH
Tensile strengthISO 13934-1StrengthNumber (N)Warp, Weft
Tear strengthISO 13937-1StrengthNumber (N)Warp, Weft
Bursting strength (knits)ISO 13938-2StrengthNumber (kPa)Bursting strength
Dimensional stability to washingISO 6330 + ISO 5077 · AATCC 135Dimensional stabilityNumber (%)Length, Width
Spirality (knits)ISO 16322Dimensional stabilityNumber (%)Spirality
Mass per unit area (GSM)ISO 3801 · ASTM D3776WeightNumber (g/m²)GSM

How do you read colour fastness grades and the grey scale?

Colour fastness results are visual ratings against a grey scale. There are two scales. The grey scale for change in colour (ISO 105-A02) rates how much the tested fabric itself faded or changed shade compared with an untested piece. The grey scale for staining (ISO 105-A03) rates how much colour moved onto the white adjacent fabrics, such as the cotton, wool or polyamide strips of a multifibre fabric. Both run from 5 (no change or no staining) to 1 (severe), with half steps written as 4-5, 3-4 and so on. Light fastness is rated on a separate blue-wool scale, usually 1 to 8.

A higher number is always better. "Grade 4" means slight change or staining; "3-4" sits halfway between 3 and 4. When you enter half grades into a spreadsheet, 3-4 becomes 3.5, which makes comparisons with a requirement such as "≥ 3-4" simple: 3.5 meets it, 3.0 does not.

How do you check a report against your buyer's requirements?

Line by line. Put each result next to the buyer's minimum, maximum or range, mark pass or fail, and fail the report if any requirement line fails. Lines with no requirement are information only. The worked example below is sample data:

  • Washing, change in colour: 4 against "≥ 4": pass. Staining on cotton: 3-4 against "≥ 3-4": pass.
  • Rubbing, dry: 4 against "≥ 4": pass. Rubbing, wet: 2-3 against "≥ 3": fail.
  • pH: 6.2 against "4.0 to 7.5": pass. Pilling: 3-4 against "≥ 3": pass.

Overall: FAIL, on one line. Wet rubbing is a common failure for dark shades; the usual next steps are a discussion with the dyeing unit about after-treatment and a re-test, which becomes a new report with its own number and date.

How long is a fabric test report valid?

As long as the buyer says. A common practice is to accept a passing report for the same fabric quality, from the same mill and process, for one season or about 12 months; other buyers want a fresh report for every order or every bulk lot. That is common practice, not a rule, so record the buyer's validity period once and work out a "valid until" date for every report. Then check the date against the shipment date, not the date you file the report: a report that expires a week before the goods leave is a held shipment waiting to happen.

In-house tests vs lab reports: keeping both together

Many mills and exporters run quick in-house tests (GSM, wash shrinkage, pH strips, crocking) before sending a sample to the buyer-nominated laboratory. Both belong to the same lot. Keep them in one register, marked in-house or external, so the merchandiser sees the in-house warning before the lab report arrives, and the QA team can show the buyer the whole history. Our guide to the fabric shrinkage test method and formula covers the most common in-house test in detail.

Keep every test report by lot and PO

The fabric test register in Fabric Inspection Software keeps lab and in-house reports where the fabric is: on the lot, the PO or the roll. Each buyer's test requirements are stored once on their buyer standard; a new test copies them into result lines, so the merchandiser only types the results from the lab's report.

  • Line-by-line judging against the buyer's minimum and maximum, with grey-scale half grades (3-4) and numbers such as pH or shrinkage %. One failing line fails the test.
  • The lab's PDF attached to the test (PDF only, up to 10 MB), stored privately in your workspace.
  • Validity tracking: valid-until from the buyer's validity days, a register filter for "expiring in 30 days", and alerts 30 and 7 days before expiry.
  • A read-only buyer link per test that shows only that test and its PDF, which you can expire or renew; or the whole buyer portal on the Exporter and Group plans.
  • A "Lab tests" block on lot and PO inspection reports, next to the 4-point results.

The register records and judges results; it does not perform tests, accredit or certify a laboratory, or claim compliance with any standard. Requirements are whatever your buyer sets.

Typical workflow

  1. Create the test from the lot or PO; requirements fill in from the buyer.
  2. Record the lab, sample reference and the date the sample went out.
  3. When the report arrives, type the grades and values and attach the PDF.
  4. The app marks each line and the test, and sets the valid-until date.
  5. Send the buyer the link, or let them see it in their portal.

Open a sample fabric inspection report to see how lot reports look, and the test register on the features page.

Email folder, spreadsheet or register?

PDFs in emailExcel trackerBrand-side platformsFabric Inspection Software
Report tied to lot and POBy file nameTypedBuilt around the brand's productsOn the lot, PO or roll
Judged against each buyer's requirementsBy eyeFormulas per sheetBrand's own requirementsStored per buyer, every line judged
Expiry alertsNoManual filterVaries30 and 7 days before
Buyer link instead of attachmentsNoNoBrand portalPer test, or buyer portal
PriceFreeFreeUsually on quote₹14,999/month (Exporter)

As of November 2026; check with each vendor. Brand-side platforms such as Inspectorio (Lab Test Management) and Pivot88 ("Test") offer lab-test workflows for brands; we describe them from their public pages.

The fabric test register is on the Exporter plan at ₹14,999 a month and on the Group plan; the Unit plan shows an upgrade panel. Prices exclude 18 % GST; see pricing or book a demo.

Fabric test report questions

What is a fabric test report?

A fabric test report is the document a laboratory or an in-house lab issues after testing a fabric sample: colour fastness, rubbing, pilling, pH, strength, dimensional stability and other properties, each with the method used, the result and, when the buyer's requirement is shown, a pass or fail. Buyers ask for it before shipment.

What tests are included in a fabric test report?

Whatever the buyer's test programme lists for that fabric. Common ones are colour fastness to washing, rubbing, light, perspiration and water, pilling, pH of the aqueous extract, tensile, tear or bursting strength, dimensional stability to washing, spirality for knits and mass per unit area (GSM). The methods table on this page names typical method references.

What is the validity period of a fabric test report?

The buyer sets it. Many buyers accept a passing report for the same fabric quality for one season or about 12 months, while others want a fresh report per order or per bulk lot; that is common practice, not a rule. Record the valid-until date with each report and check it before shipment.

What does colour fastness grade 4 mean?

On the grey scale, grades run from 5 (no change or no staining) to 1 (severe). Grade 4 means slight change or staining compared with the unwashed original or an unstained fabric. Half grades such as 3-4 sit between two steps. Whether 4 passes depends on the buyer, who often asks for 3-4 or 4 minimum.

What is the difference between change in colour and staining?

Change in colour rates how much the tested fabric itself faded or changed shade, assessed with the grey scale for change in colour (ISO 105-A02). Staining rates how much colour transferred onto the adjacent white fabrics, for example cotton or wool strips in a multifibre, assessed with the grey scale for staining (ISO 105-A03).

Which standard is used for colour fastness to washing?

ISO 105-C06 is widely used, and AATCC 61 is the common US equivalent; the buyer's manual names the exact method and test conditions. Fabric Inspection Software lets you record the method for each result line, but the app does not perform tests and makes no claim about a laboratory's accreditation.

Can in-house test results and lab reports be kept together?

Yes. In Fabric Inspection Software each test record is marked in-house or external lab, with the lab name and report number. Both are judged against the same buyer requirements and appear together in the register and on the lot report, so a merchandiser sees every result for a lot in one place.

How do I share a test report with a buyer?

Send a link instead of a PDF attachment. Each test in Fabric Inspection Software has a read-only buyer link that shows only that test: the summary, every requirement and verdict, and the attached lab PDF. You can expire or renew the link at any time, and it is never indexed by search engines.

Inspect the first roll the same day

We load your defect master, buyer limits and report layout, then train your inspectors on the floor in Tirupur, Surat or Ludhiana, or over a video call. 14-day pilot, no card. Plans start at ₹4,999 a month with unlimited rolls, and every result follows the ASTM D5430 4-point rules and your buyer's own limit.